What should I do if there is a hole in the plastic bucket

- Oct 23, 2019-

If there is a small hole in the plastic bucket, don't give it up. This is too wasteful. In fact, there is a way to remedy it. If the hole is not big, you can choose adhesive adhesion. Of course, this method is limited to small hole holes. If it is found that it is a large hole, the best way is to use a special plastic welding to make up, or you can find a suitable plastic barrel to weld to the leaking place.

It should be emphasized that the above method is only applicable to the case where the hole is not large. If the hole is large, in order to avoid unnecessary loss, it is necessary to consider purchasing a new plastic bucket.

Plastic buckets are not non-recyclable. Consumers can use them twice during use. What is the specific situation? Let's take a look at it:

Paint plastic buckets are generally well-made and costly. Many consumers do not discard them directly after using the plastic buckets, but clean them before use. In terms of use, on the one hand, because the plastic buckets of paints are often carried with hands and are convenient to carry, many farmers' friends will put clothes and other items in the paint plastic bucket, and then use plastic buckets instead of boxes to use them on the way out. On the other hand, some people also use plastic buckets to pickle pickles, pickles, etc. For this type of use, we recommend that the plastic buckets be completely cleaned, and it is not recommended to use them because of the long-term storage of food in paint plastics. In the barrel, the safety is worrying.

There is also a very high-use type of edible oil plastic drums, which are often used for brewing or filling liquid foods such as drinking water. In fact, repeated use will also touch on food safety issues and require attention. For the secondary use of plastic drums, we think it is very worthy of recommendation, but it still needs to be taken seriously and scientifically.https://www.fhpails.com/