What protection should be done when using chemical plastic buckets?

- Mar 20, 2020-

Generally, the production of chemical plastic barrels is performed in a single molding process using a mature rotomolding process. The chemical plastic barrels formed by this process are acid and alkali resistant, impact resistant, and not easy to age. Chemical plastic buckets have good sanitation and UV resistance, and the plastic buckets with higher quality and more characteristics are relatively expensive. As far as we can see, chemical plastic buckets have been widely used as supporting devices for secondary water supply, water storage, and water treatment and purification equipment in high-rise buildings.

The special materials and special processing technology of chemical plastic barrels give them unique application properties. The maximum heat that chemical plastic barrels can carry is less than 108 degrees, and the lowest heat is 70 degrees below zero. Therefore, usually, chemical plastics are used. The temperature of the liquid carried in the bucket should be between forty degrees and sixty degrees below zero. However, if it exceeds this value range, when the device is heavier or the liquid is hotter, protective measures should be taken for chemical plastic barrels to avoid deformation of the plastic barrels.

Chemical plastic buckets are usually used to hold liquid and solid articles in the chemical, pesticide, pharmaceutical, food, hardware electronics, mechanical and electrical industries. At normal temperature, salt, alkali, and other mixtures are no problem. If chemical plastic drums are used to install liquids that will produce chemical reactions, precautions should be taken to confirm their reaction and whether they can withstand their temperature.

If it contains easily-decomposable chemicals, you can use a vent with a vent cap for the chemical plastic barrel to avoid the danger of overpressure during transportation, and at the same time to ensure the sealing performance to liquids.https://www.fhpails.com/