For the upcoming filling, the commodities suitable for the lid and the barrel body should be checked first, otherwise the lid and the barrel body do not match, which is particularly likely to cause liquid leakage. During the process, please do not drag the bucket on the ground immediately to prevent damage and scratches on the bottom. The proper way is to lift with two hands or transport by forklift pallet. It should be noted that the temperature of filling and liquid cannot exceed 70 degrees, and the temperature of loading and transportation should not exceed 25 degrees. It is forbidden to fill plastic barrels and transport in high-temperature liquids immediately after loading. It should also be stored in a clean, dry area to avoid contaminants in the mouth of the barrel, and it should be prevented from being immediately exposed to the sun.
The plastic barrels used should be smooth inside and outside, welded seamlessly, and very light, with good compressive strength, impact resistance, corrosion resistance, non-toxic and odorless, and transportation is very convenient and fast.
Its heat bearing range is usually within minus 40 degrees to 60 degrees. If this temperature is exceeded, the plastic barrel will be deformed or even cracked. Therefore, when we use it, we must ensure that its temperature does not exceed this range. If this temperature must be exceeded, we must take some precautions.