What are the factors that affect the tightness of plastic drums?

- Apr 08, 2020-

In fact, when there is a problem with the tightness of the plastic drum, we must first find out what is wrong, such as: Is there a problem with the sealing of a plastic drum, or a problem with the sealing of the entire batch of products, the factors that affect the tightness of the plastic drum are The following aspects:

1. Poor plastic material. Generally, some manufacturers mix waste materials to reduce the cost of products, resulting in a decline in the quality of raw materials, which affects the tightness of plastic barrels;

2. The material formula is not professional. There are many materials for the production of chemical plastic barrels. The commonly used materials are polyethylene and polypropylene. Due to the different plastics and additives used in the production of chemical plastic barrels, the performance of different raw materials varies greatly. It is soft, and to improve the tightness of plastic drums, it is necessary to fully understand the material properties and give full play to its advantages. The proportion of materials and formulas are critical. This is an important factor that affects the tightness of plastic drums;

3. The mold is not precise enough. If the mold is not precise enough, it will affect the degree of fit between the plastic barrel lid and the barrel body. The precision of the mold is also an important factor affecting the sealing of the chemical plastic barrel;

4. The equipment is not debugged. Generally, the equipment must be debugged before production. Poor debugging will also affect the tightness of the chemical plastic barrel.

Plastic bucket is a light-weight liquid packaging container. It has a good seal when holding liquid. Its manufacturing materials are not easy to corrode, light in weight, and perform well in logistics transportation. Due to the light weight of plastic drums, they can be stacked together in the warehouse to save the area of the warehouse. It is only necessary to stack very high when stacking. Is it convenient for such plastic buckets to be stacked?

The plastic barrels are lighter in weight, and they only need to be placed in a uniform and orderly manner when stacked, so there will be no major problems. It should be noted that the empty plastic barrels are lighter in weight, and they should be handled with care when stacked. Once the force is too strong, the plastic barrels may fall or be skewed.

Another point to note is that if a large number of plastic barrels are stored in the warehouse, it is still necessary to pay attention to fire prevention. After all, its material is flammable. Pay more attention to safety to ensure more.

https://www.fhpails.com/