The process after the printing of the round can and the calculation of the weight of the cylindrical shell

- Jun 03, 2019-

1. When buying a product in a round can, if you want to choose a good quality product, is it necessary to consider the product price or the manufacturer of the product?

If you want to choose a good quality product, you must choose a professional round can manufacturer to ensure product quality and product performance. One point, the answer to this question is for the manufacturer of the product, not the price of the product. Moreover, the above requirements must be strictly enforced, and there should be no sloppy and lax.

2. Can I customize the round cans online?

The round cans are purchased online, and the products can be customized. The products can be customized according to different user needs or some special use requirements to meet various user requirements. However, because it is a custom product or a non-standard product, it will be different from the standard product in terms of product price and needs to be recalculated and determined.

3. Round cans, if it is a cylinder, how is the weight of its cylindrical shell calculated?

A round can, if it is a cylinder, the total volume is the bottom area multiplied by the height, and the total weight is the total volume multiplied by the specific gravity of the material used. Since this round can is hollow and the hollow portion is also a cylinder, the volume of the cylindrical shell is the total volume minus the hollow volume, and the weight of the cylindrical shell is the volume of the cylindrical shell multiplied by the specific gravity of the material used.

4. When using a metal material in a round can, what processes do the metal materials need after printing?

In the case of a round can, if the material is a metal material, after the metal material is printed, the two processes of glazing treatment and molding processing are required. Among them, the glazing treatment is mainly to use varnish to protect the ink and increase the gloss of the round can, and to improve the overall aesthetics of the round can. In addition, these two processes are important processes, so they should be taken seriously and carried out, and they should not be sloppy.

www.fhpails.com