Process requirements for making iron drums

- Oct 06, 2020-

1. Prepare the raw materials and tools for making iron barrels. Generally speaking, we need to prepare a large enough iron sheet, pliers and tools such as screws and screwdrivers, and some other items will be used.

2. After preparing the raw materials, you can start making iron buckets. Use scissors to cut out a rectangular piece of iron sheet. This size needs to be determined according to the size of the iron barrel made.

3. Next, roll up the cut iron sheet and make it into a cylindrical shape, then use screws and other things to fix the interface, ready to use.

4. Using scissors, cut two discs with the same diameter as the cylinder on the iron sheet and use them as the bottom and top of the iron bucket.

5. Fix the top of the cylinder. The bottom is very important. If it is not handled properly, it may affect the tightness of the iron drum, so the bottom needs to be connected with a professional sealant.

6. If you think the appearance of the made iron bucket is not good, you can draw some patterns on the surface of the iron bucket as decoration.