Points to note when storing injection barrels in winter

- Dec 10, 2019-

Although the injection barrel has a certain degree of cold resistance, we still need to pay attention to it when storing it in winter. So what should we pay attention to when storing in winter?

1. The barrel should be stored in an awning to prevent direct sunlight. The storage temperature is below 40 ° C and above -18 ° C. 2. The barrels stacked on the tray are packed and fixed with a wrapping film. During the packaging, the barrels and barrels should be prevented from kneading and deforming each other, and the deformation amount is 5% or less. After packing, the number of stacked layers of the pallet should be no more than 2 layers. When the stack is high, the upper and lower layers should be aligned so that the components of the upper layer are evenly applied to the bottom layer. The ground should be level and level. 3. The injection barrels after packing the goods are stacked with double-sided flat pallets, and the pallet specifications are not greater than 1.3 meters. One layer is stacked on each pallet. The number of stacked barrels depends on the size of the pallet. The edge of the barrel must not exceed the edge of the pallet.https://www.fhpails.com/