There are a lot of users who have used plastic buckets to raise fish, especially children. It will not cause any problems in a short time, but if you do not replace the water source for a long time, it will lead to insufficient odor filtration and lack of oxygen. It leads to the death of fish, so from the practical point of view, industrial plastic barrels can raise fish but cannot be used for a long time.
If there is no special situation, it is not recommended to use plastic buckets for fish farming, because in most cases the fish will die, so it will not be worth the loss. If you really want to raise fish, it is recommended to buy a fish tank.
The plastic bucket has been used for a long time, and it is difficult to guarantee that there will be some problems. How can it be remedy if there is water leakage in the plastic bucket?
First of all, we have to confirm whether the excuse of the plastic barrel is iron or plastic. If it is iron, it should be taken under welding. If it's plastic, you can find a piece of plastic material of the same quality as your water tank, ignite it with fire, then drop the molten plastic liquid into the leaking area, melt it several times, and drop it a few times, so that the interface will be more sturdy.
Because we use plastic buckets in our usual time, there will be no big problems when we use them. So we don't know about his various quality standards, but this will hide some problems, so when we buy It is necessary to understand the standard requirements for qualified plastic drums.
Heat and cold resistance: The hot and cold box has high requirements for heat resistance and cold resistance, and will not be deformed in high temperature water. Durable: It has excellent impact resistance and is not easily broken when pressed or impacted. Seal: This is the primary consideration for choosing a takeaway bucket. Although different brands of products are sealed in different ways, excellent sealing is a necessary condition for the long-term preservation of memory food.
When considering the purchase of plastic drums, we can also consider his environmentally friendly type, because the non-toxic, tasteless, UV-resistant plastic buckets can meet any of our daily use requirements.
Under the narration of professional and technical articles, we can understand that the chemical plastic barrel is a special tool used in the industry, so it has better impact resistance, acid and alkali resistance, anti-aging, light weight, no leakage and long service life. Other interests, but there is a flaw in the chemical plastic barrel, that is, there is a certain heat acceptance plan. Let's get to know it together!
According to the introduction, it is known that the temperature acceptance plan of the chemical plastic barrel is usually within the range of minus 40 degrees to 60 degrees. If the temperature exceeds and about this temperature, the plastic barrel will be deformed or even split, so we are using it. To ensure that the temperature does not exceed this plan, assuming that it is necessary to exceed this temperature, we need to do some precautions, such as putting a plastic bucket around, perhaps other preventive measures.
Therefore, regarding the use of chemical plastic barrels, it is obstructed to hold concentrated nitric acid at a concentration higher than 30%, because this will cause the plastic barrel to melt and melt, which constitutes an unexpected throw away. It is also expected that after the above knowledge, it can lead to the attention of the majority of users.https://www.fhpails.com/