How to maintain the iron bucket

- Feb 04, 2020-

Before using the iron bucket, you can apply some oil on it, such as peanut oil and lard. This way, the grease will cover a layer of maintenance film on the surface of the stainless steel iron bucket, which can inhibit the chemical reaction of oxygen. In the future, if you find that the stainless steel iron bucket becomes black, do not use household steel wire to scrub it, and do not use liquid detergent containing bleaching ingredients to clear it. This will recover the light temporarily, but you will destroy the maintenance film. As time goes on, you can't help getting dirty, and your troubles will increase.

The correct way is to sprinkle the detergent or decontamination powder on a soft cloth, soak it with a little water, then wipe it, then clean it with water, put it outdoors, dry it naturally, and do n’t put the stainless steel iron bucket in a wet * **, no contact with air. In this way, the stainless steel iron bucket will be corroded due to moisture. Although you know the method of wiping, but do not invent the opportunity for the stainless steel iron bucket to be corroded, do you think it will be fresh? How about?

The inner coated anti-corrosion closed iron bucket is made of cold-rolled iron plate structure. Due to the good performance of cold-rolled iron plate, cold-rolled strip and steel plate with thinner thickness and higher accuracy can be obtained, with high flatness and high brightness on the outside. It is easy to stop the coating process, there are many types, and it is widely used. At the same time, it has the characteristics of high stamping performance and low yield point.